Chain
tension should be checked before any cutting and also periodically
throughout the job. To adjust chain tension, follow these
steps:
FINE ADJUSTMENT
REMOVE THE BEAM CUTTER FROM THE SAW BEFORE PERFORMING FINE
ADJUSTMENT
1. Loosen the chain adjustment tension
lever screw and hex screw above the tension lever with a 5/32" hexkey
wrench.
2. VERY
IMPORTANT - Loosen slide spacer bolts before performing
fine adjustment.
3. Push the lever down to obtain
proper tension.
4. Re-tighten the lever screw
and hex bolt.
GROSS ADJUSTMENT
The fine adjustment is only effective up to 1/8" adjustment. For more
adjustment, loosen the chain bar bolt (P2034) and slide the chain bar
downward to tighten the chain. |
